This is important!  This Philips FR2+ Rechargeable Battery Pack is compatible with FR2+ defibrillators sold after 12/1/01 only. To use with an earlier model Philips FR2 AED, the device must be upgraded. Not all older FR2s are eligible. The Charging Unit Part #M3849A is not included, but is available for purchase.

The battery will take no longer than 3 hours to fully charge. It should be fully charged before putting it into use.

Installation Procedure

1. Charge the Philips HeartStart FR2+ Rechargeable Battery Pack as per the instructions that came with the battery and the charger.
2. Squeeze the yellow latch on the old battery pack to release and remove it from the AED.
3. Make sure there are no electrode pads connected to the AED.
4. Hold the freshly charged Battery Pack by the yellow latch and carefully slide it into the battery cavity at the top of the AED.
5. Slide the Philips Rechargeable Battery Pack into the AED until you feel and hear it click into place.
6. Watch for your AED to commence a self test that takes approximately 90 seconds to complete. In order for your Philips HeartStart FR2+ to recognize the rechargeable battery and its present capacity, it is essential to let the battery insertion self test to complete.

As usual, always refer to your AED's Operator's Manual for complete instructions.

The AED Superstore has a great price on the Philips HeartStart FR2+ Rechargeable Battery and free ground shipping within the lower 48 United States is included. To place an order just call us and a friendly, knowledgeable customer service agent will help you. Or, click to add it to your cart to purchase online.